Menu
Your Cart
Welcome to nem !

Radiolink R12DSM 12CH mini Receiver 2.4GHz S-BUS, PPM

Radiolink R12DSM 12CH mini Receiver 2.4GHz S-BUS, PPM
  • Stock: In Stock
  • Model: ERST-R12DSM
sold 0
views 12
29.76€
Ex Tax: 24.00€

Product Features:
Radiolink R12DSM, 2.4G 12 channels receiver, DSSS and FHSS
R12DSM, 12 channels of SBUS/PPM signal output, detachable antennas, adaptable almost all of the flight controllers, is a great choice for a racing drone.
4KM (2.5 Miles) * Range enables all possible RC fun
Real-time telemetry RSSI information allow users to receive crucial information on the model's systems.

How to match code with transmitter:
1. Put the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R12DS.
3. Connect CH3 of R12DS to ESC.
4. There is a black button on the R12DS, use a thin stick press the button twice in two seconds, receiver light starts blinking, after about blinking 8 times, match code success and receiver signal LED always on! 

Installment of receiver antenna:
1.The antenna must be kept as straight as possible. Otherwise it will reduce the effective range.
2.Large model aircraft may has some metal part interfering signal; in this case the antennas should be placed at both sides of the model. Then the best RF signal condition is obtained at any flying attitude.
3.The antennas must be kept away from conductive materials, such as metal and carbon. at least a half inch. The coaxial part of the antennas does not need to follow these guidelines, but do not bend it in a small radius.
4.Keep the antennas away from the motor, ESC, and other noise sources as far as possible.
5.Press and hold the Easy Link (ID SET) one second, then the receiver starts work.
6.After all of the above steps were finished, the LED indicator will turn and keep in red.
7.The receiver can be packed by sponge or foam for shockproof when it is installed to the model. After all of the above steps were finished, turn off the transmitter and then power it on, now the program functions to assure it under control of transmitter with a right connection.  

Technical Parameters:
Weight: 2.5g (0.09oz)
Channels Qty: 12 channels
Signals: SBUS/PPM
Operating Voltage: 4.8-6V
Operating Current: 38-45mA@5V
Section Precision: 4096, 0.25us per section
Control distance: 4000 meters (2.48Miles) in the air (Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations).
Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9

What you Get:
1 x Radiolink Receiver R12DSM 12CH 2.4GHz 

Write a review

Please login or register to review
Notification Module
By using nem you agree to our use Cookies